Alkaline, Acid and Exothermic Perms for Hair

Posted by admin - April 24th, 2010

It’s more than half a century that hair perms, also known as chemical waves, have been in rather wide use. Still, quite many prefer to avoid perming because of the common belief that perms can seriously damage the hair and make it brittle, dry, lifeless and fragile. Though, in most cases this happens because of incorrect use of perms. To avoid such drastic effect, it is recommended to apply different perms according to your hair type. All in all, there are three basic types of perms: acid, alkaline and exothermic.

Alkaline perms are considered to be the most popular type. The main reason for this can be the fact that they create a more firm curl that stays permanent for a longer period of time. Another reason is that are applied much more quickly than acid and exothermic perms: it takes only 20 minutes to finish the procedure. Moreover, they don’t require additional heat while applying. That’s why alkaline perms are also known as “cold” perms. They contain ammonium thioglycolate, an active chemical that makes an unpleasant smell during the process. Alkaline perms have a pH level of approximately 9.5, which is very high. Therefore, alkaline perms give strong and firm results on normal, thick, coarse and resistant hair. On the other hand, the higher the pH level of the lotion’s pH, the more damaging it is for the hair. This is probably the reason why certain conditioning agents are often added to these perms.

Acid perms are becoming more and more popular nowadays. They produce highly conditioned and flexible waves. These perms have activators added to them and generally require heat to open up the cuticle scales to get into the cortex. Though, additional heat may not be necessary in cases when the cuticle layer is damaged (in bleached or chemically treated hair). Acid perms contain a chemical called glyceryl monothioglycollate that has a milder acidic action. That’s why they generally have a slightly acid pH (from 5.5 to 7). Still, they are known to cause allergic reactions if used frequently. Also, because of their gentle formulation, acid perms take much longer to be applied on hair. In comparison with alkaline perms, acid perms  are more suited to fine, sensitive, bleached, fragile, porous, chemically treated, damaged or tinted hair because they minimizes the risk of hair damage have a mildly acidic action that.

Exothermic perms, or exothermic waves, are self timing and self heating. They creates chemical reaction that makes them heat up internally. The heat allows the lotion to get into the cortex and moulds the hair into its new form from inside. Exothermic perms give beautiful bouncy and resilient waves. They are thioglycolate free and have a neutral or low pH level what make them suitable for weak and fragile hair.

Tags: , , , , , ,

Tips to Perm Bleached & Colored Hair

Posted by admin - April 22nd, 2010

If the hair has been permanently bleached or colored, as a rule, it is more porous. Consequently, it will take in perm lotion much quicker. That is why you should choose the appropriate lotion strength particularly for this type of hair. There is hair type that is unevenly porous and, thus, in order to even out the porosity, it will need a pre-perm lotion applied to uneven parts. Remember, pre-perm lotions are not supposed to be rinsed out before perming. They are used on hair tied with a towel and left on. As a matter of fact, pre-perm lotions usually have liquid form. There are four main functions of them:

  • Pre-perm lotions keep the hair moist, so there is not need to spray the hair with water.
  • They even out the porosity of the hair and make perm lotions penetrate different hair parts evenly at the same rate.
  • Some pre-perm lotions protect the scalp from irritation due to certain agents that they contain.
  • These lotions maintain the natural moisture level of hair during the whole perming process.

You can als0 make use of perm regulators that usually come in the form of a thick gel. They are developed to be applied if you arrange all kinds of wind where some parts of hair don’t need perming. They are also used on hair that may need pre-perming at the root area only, because there are already waves and curls in the mid-lengths and on the ends of hair. The зукзщыу of these products is to reduce the amount of lotion that penetrates the cortex of the hair in order to prevent breaking any bonds within.

Tags: , , , , , ,

Choosing Proper Lotion for Your Type of Hair

Posted by admin - April 21st, 2010

Before you start any perming, make a careful analysis of the scalp and hair. Depending on the type of hair that one has, there are different types of perm lotions to choose from. They have various formulations and, consequently, strength. So, take into consideration the following tips to determine your choice.

The general rule here is this: resistant hair needs a stronger perm lotion, while more porous hair needs a weaker one.

  • If the hair has been processed with bleach and highlights, use the bleached type of perm lotion.
  • If the hair has been processed with permanent tints, there is a special tinted perm lotion.
  • If the hair is in a very dry and porous condition, you should pick up the over-porous lotion type.
  • In case of fine hair with the non-porous texture or coarse hair, make use of the resistant lotion type.
  • Normal perming lotion is used for natural hair that has not been treated with chemicals.

Whatever lotion type is going to be applied always stick to the manufacturer’s instructions on its use and suitability.

Tags: , , , ,

Main Stages of Perming

Posted by admin - April 21st, 2010

In order to choose the proper type of lotion to perm the hair, it is important to understanding the overall chemical process of perming. All in all there are three main stages of perming. They are: softening, moulding and fixing.

First, the hair is softened with the use of the perm lotion. Let’s dwell upon it in more detail. The strong disulphide bonds in hair shafts are made of an amino acid called cystine. These bonds are broken by the alkaline perm lotion while perming, as it contains a reducing agent called ammonium thioglycollate. In most ceses perms will successfully process without the use of additional heat. Nevertheless, the processing time can be speeded up if you use an accelerator or an additional source of heat.

During moulding the hair acquires the new shape. The perm lotion covers the perm rods and gets through the cuticles reaching the cortex and making hair shafts softened. Now it will easily mould itself to the shape of the perm rods. When the correct degree of curl or waves is achieved, proceed to the next step.

Now it’s time to fix your hair into its new position. During this stage the hair is fixed permanently with the help of neutralizer. Neutralizers have different concentrations and forms. Therefore, some of them can require dilution prior to use by an applicator flask or sponge, others can be applied instantly to the perm rods from an applicator bottle. A great deal of neutralizers need a development phase but a few work comparatively faster. As far as neutralizing is complete, it is necessary to use an anti-oxidant hair conditioner  in order to close the cuticles, wash out ramaining neutralizer, replace moisture, and restore еру natural pH level of hair.

Tags: , , , , , , ,

Introduction to Hair Perming

Posted by admin - April 20th, 2010

Perms are defined as permanent waves, curls or straight hair that are achieved due to chemical or thermal treatment of hair (perming). It’s true that today people expect more from perming than than just waves or curls. They want texture, more volume, lift, and body of their hair. In other words we are speaking about general and all-inclusive enhancing of hairstyle.

Apart from practical skills, a nice perm depends also on hairdressers ability to make the right decisions about hair before perming and during the process. Therefore, it is essential to accomplish diagnostic tests before you start. It will help to choose and use proper treatments, tools, equipment and techniques. Moreover, it also minimizes occurrence of unpredictable effects, conditions and problems.

Before perming you should also make a careful scalp and hair analysis, because it is necessary to be sure that there are no contra-indications such as infectious and non-infectious disorders or conditions of scalp and hair: scalp abrasions, cuts, psoriasis, hair loss, headlice, etc. Also hair should be strong and healthy enough to carry out perming.

In the majority of cases hair will need cutting. It is important because in order to make new perms you should either to re-style your hair or to remove any previous perms. Cutting can be done either before or even after perming, it’s a matter of your choice. If you use perming for more fanciful results such as increasing hair volume, it is recommended to curl the hair into style prior to winding, because this will allow you to determine precisely where lift, texture and movement are needed within the hairstyle.

The stylist should explain to the client what is needed to achieve the desirable result. In course of consultation the hairdresser should discuss the amount of time that the client will need to spend on the arrangement and upkeep of the new hairstyle. As a matter of fact, large and smooth curls and waves won’t last as long as traditional perms. Also discuss how the client can maintain the new hairstyle at home using common shampoos and hairstyling and hair care products, equipment and tools.

Tags: , , , , , , ,